What type of sensor are you mainly interested in?

What mode of operation will be used? (check all that apply)
Infrared radiation detection
General light detection
Heat flux measurement
Contactless temperature measurement
ΔT measurement
Other:
What type of thermopile module is needed? (check all that apply)
Single element sensor
Quadruple element sensor
Small array for image purposes
One-dimensional position sensor
Two-dimensional position sensor
Other:


What thermopile properties are important in your application? (check all that apply)
Thin Surface mountable Array possibilities Custom made design Vertical config. thermopile Good price
Bendable Large area Robustness (plastic substrate) None really

What voltage response is required (full thermopile module)?
Low (<3 Vmm2/W) Medium (<3-10 Vmm2/W) High (10-30 Vmm2/W) Very high (>30 Vmm2/W) Don't know

What detectivity (cm√Hz/W) is required?
Low (<1e7) Medium (1e7-3e7) High (3e7-9e7) Very high (>9e7) Don't know

What impedance (electrical resistance) is required? (check all that are allowed)
Really small (<50 Ω) Very small (50-500 Ω) Small (0.5-5kΩ) Medium (5-25kΩ) High (>25 kΩ) Don't know

If used for IR or light detection: what field of view is important(FOV)
Sharp angle (<10°) Medium angle (10°-45°) Wide angle (45°-180°) Don't know Not applicable

Thermopile module dimensions

What maximum sensor thickness can you allow in your system?
Ultra thin (<0.3 mm) Thin (0.3-1 mm) Medium (1-4 mm) Thick (standard) (>4 mm)

What size (side length) of the sensor do you request? (check all that apply)
Small (<1 mm) Medium (1-3 mm) Large (3-10 mm) Very large (10-30 mm) Huge (>30 mm) Don't know

What size of the IR-window (hot spot) can you allow?
Small (<1 mm) Medium (1-3 mm) Large (3-10 mm) Very large (10-30 mm) Huge (>30 mm) Don't know Not applicable

Please specify something about your market/application

What is your market segment? (check all that apply)
gas sensors heating and ventilation white goods surveillance consumer electronics medical military
space automotive industrial (general) process control IR-imaging other:

Will the sensors be used in an existing product/market or for a new product/market
Existing product New product No comment
Existing market New market No comment

When will the product be launched (in months)
< 6 months 6-9m 9-12m 12-18m 18-24m >24m don't know

What annual volumes (sensor units) do you expect you need
2010: <100 100-1000 1k-10k 10k-100k 100k-1000k >1M Don't know (no comment)
2011: <100 100-1000 1k-10k 10k-100k 100k-1000k >1M Don't know (no comment)
2012: <100 100-1000 1k-10k 10k-100k 100k-1000k >1M Don't know (no comment)

How big part of your final product/system constitutes the thermopile?
Minor part Some part Fairly big part Big part Not applicable (no comment)

What additional system components do you require? (check all that apply)
Bandpass filter White light filter Refractive optics Diffractive optics Thermal encapsulation Heat sink Pre-amplifiers

Are there today other (commercially available) sensors that meets your requirements
Yes No Don't know

Other requests/comments



How do you want us to get in contact with you?

Phone me Email me I will contact you

Your contact information:
Name
Phone
Email
Company
Country or location
Send the form by pressing the "Submit" button below


The information in the form will sent to JonDeTech by pressing the submit button. The information will be kept as confidential between JonDeTech and the sender and it will not be distributed or delivered to other parties. It is agreed that JonDeTech have the right to use the information solely for business purposes and to contact the sender if so stated in the form.